Products > EPoX Series > 2E10-110-TX

2E10-110-TX

1-Port EPo2 TX Adapter

Overview

AETEK EPo2(Ethernet & Power over 2 wires) kit allows you to connect PoE IP devices such as Intercom/Access Control/Speaker/Touch Screen Station/VoIP/sensor/camera over in-wall 2 wires of doorbell wire, telephone line or 1-pair UTP/STP to Ethernet network. You don’t have to configure anything, and you only need one AETEK EPo2 unit at each end of PoE IP device(PD) & Ethernet Switch port.

In addition to reuse 2-wire cable, AETEK EPo2 is designed to extend PoE range & data rates far beyond 100meters/100 Mbps limits even using 2-wire thinness 26AWG cable.

Key Features

  • Uses telephone line, doorbell wire or 1-pair UTP/STP to connect PoE IP devices
  • Eliminates extra intermediate PoE switch
  • Plug-and-Play deployments
  • Reuses in-wall 2 wires infrastructure
  • Optional 19’’ 4-bay rack mount chassis(CH-100)

Applications

Accessories

EPo2 RX Adapter Series

EPo2 RX Adapter Series
2E10-110-RX 2E10-110 EPo2 adapter(RX)
65W@56VDC power adapter
2E11-110-RX 2E11-110 PoE EPo2 adapter(RX)
Supports 30W/60W/95W PoE Input

Specifications comparison

Model
2E10-110-TX
2 PIN Terminal block
1
10/100Mpps Ethernet RJ45
1
Transmission mode
TX mode
PoE Pass Through
v

Specifications

Interface / Distance
2 Wire Link
2-Pin Terminal Block x1
10/100 Mbps Ethernet
PoE PSE RJ45 x1
Transmission mode
Transmitter TX mode
Cable Type
Doorbell wire 18/20/22 AWG
Telephone cable 24/26AWG
UTP/STP cable: 23/24AWG
Bandwidth
600 Mbps
Power Specifications
Power Input
EPo2@50~57VDC
50~57 VDC power adapter
Power Output
PoE
Unit Power Consumption
3 watts
Physical Specifications
Dimensions (LxWxH)
85.4 x 47.1 x 23 mm (3.36x1.85x0.91
Weight
0.2 kg (0.44 lb)
Connectors
2P Terminal Block x1, RJ45 x1,
DC Jack x1, PoE On/Off Switch x1
Mounting Type
Wall mount
Environmental Specifications
Operating Temperature
-20°C ~ 60°C (-28°F ~ 140°F)
Storage Temperature
-20°C ~ 85°C (-28°F ~ 185°F)
Relative Humidity
5% ~ 95% non-condensing
Certifications
EMC
CE, FCC, VCCI, C-Tick
LEDs
LAN
Ethernet status
PWR
Power status
LINK
EPo2 TX device connect status
POE
PoE status