Productos > EPoX Series > 2E11-110-RX

2E11-110-RX

1-Port PoE PD EPo2 RX Adapter

La descripción general

AETEK EPo2(Ethernet & Power over 2 wires) kit allows you to connect PoE IP devices such as Intercom/Access Control/Speaker/Touch Screen Station/VoIP/sensor/camera over in-wall 2 wires of doorbell wire, telephone line or 1-pair UTP/STP to Ethernet network. You don’t have to configure anything, and you only need one AETEK EPo2 unit at each end of PoE IP device(PD) & Ethernet Switch port.

In addition to reuse 2-wire cable, AETEK EPo2 is designed to extend PoE range & data rates far beyond 100meters/100 Mbps limits even using 2-wire thinness 26AWG cable.

Características principales

  • Uses telephone line, doorbell wire or 1-pair UTP/STP to connect PoE IP devices
  • Eliminates extra intermediate PoE switch
  • Plug-and-Play deployments
  • Reuses in-wall 2 wires infrastructure
  • Optional 19’’ 4-bay rack mount chassis(CH-100)

Aplicación

Accessories

EPo2 TX Adapter Series

EPo2 TX Adapter Series
2E10-110-TX 1-to-1 EPo2 adapter(TX)

Rack Mount Chassis

Rack Mount Chassis
CH-110-V2 19’’, 1U 8ay rack mount chassis
Works with 2E11-110-RX

Specifications comparison

Model
2E10-110-RX
2E11-110-RX
2 PIN Terminal block
1
1
10/100Mpps Ethernet RJ45
1
1
Transmission mode
RX mode
RX mode
PoE PD
-
v
PoE Pass Through
v
v

Especificación

Interface / Distance
2 Wire Link
2-Pin Terminal Block x1
10/100 Mbps Ethernet
PoE PD RJ45 x1
Transmission mode
Receiver RX mode
Maximum TX quantity
7
Cable Type
Doorbell wire 18/20/22 AWG
Telephone cable 24/26AWG
UTP/STP cable: 23/24AWG
Bandwidth
600 Mbps
Power Specifications
Power supply
Optional :
I36-100 : 60W PoE Injector
H30-044-90 : 60W/95W PoE Switch
PoE Input
Support 30W/60W/95W PoE
PoE Pass Through
Support
Unit Power Consumption
3 watts
Physical Specifications
Dimensions (LxWxH)
85.4 x 47.1 x 23 mm (3.36x1.85x0.91
Weight
0.2 kg (0.44 lb)
Connectors
2P Terminal Blockx1, RJ45 x1
Mounting Type
Wall mount
Environmental Specifications
Operating Temperature
-20°C ~ 60°C (-28°F ~ 140°F)
Storage Temperature
-20°C ~ 85°C (-28°F ~ 185°F)
Relative Humidity
5% ~ 95% non-condensing
Certifications
EMC
CE, FCC, VCCI, C-Tick
Safety
EN60950-1
LEDs
LAN
Ethernet status
PWR
Power status
LINK
EPo2 TX device connect status
POE
PoE status