AETEK_SWITCH_FW_v3.05.03

x60 Series
================================================================
Add Function:
1. GVRP
2. DHCP Snooping
3. Event notification: modified the PoE Fault UI mapping to "budget exceeded/overload"
4. Changed the default setting of DCP passive ports 7/8 to AT
5. DCP passive ports 7/8: changed 24V/56V 2-Pair mode to Mode A/B
6. Operation History for POE setting
7. Loop detection event notification
8. NTS Topology side show different network topology

Bug Fix
[Switch]
  - Fixed the issue where the default settings for DC24V_Port2 / DO Schedule Disable could not be saved
  - When enabling or disabling the PoE schedule settings, passive ports will remain in the "ON" state
  - Fixed the issue where DCOUT could not set the PowerCycle time
  - [H60-022-90-120]Added OID and Fixed top panel issue
  - When DC out schedule is disabled, it should not revert to ON
  - Running config cannot be restored to startup config
  - Fix total-budget overwrite pd-in detect bug
  - NTP issue
  - Web cache issue
  - ERPS bug fix
  - Fix 10G link issue
 
[NTS]
  - Topology only displays its own PoE and DC information and cannot display data from other devices
  - The PoE config on the Dashboard is missing 2-Pair Mode A and Mode B options
  - Modify for dashboard throughput monitor issue
  - Fix topology dashboard FW upgrade issue
