Productos > Camera Housing > S5000-TI

S5000-TI

AISI 316L stainless steel EPoT Camera Housing

La descripción general

AETEK's S5000-TI camera housing constructed of AISI 316L stainless steel for design to protect IP box/brick cameras in highly corrosive & severe environments such as offshore, chemical, petrochemical, and tunnel areas. The S5100-TI is compliant to IP68 and IK10 standards. A EPoT input is obligatory for this robust housing, providing PoE & DC12V output inside housing. S5000-TI is equipped with a built-in 12W VAIR illuminator that is adjustable on beam angle by remote control thru RS485 Pelco-D command or manual dip switch to suit camera's FOV. The S5000-TI supports EPoC input with blower & adjustable sunshield to fit corrosive and severe environments.

+ AñadirALaListaDeConsultas DocumentoDeDescargar

Características principales

  • AISI 316L stainless steel construction
  • Fits corrosive & severe environments
  • Built-in 12W VAIR Illuminator up to 140m
  • Long range of built-in 12W VAIR Illuminator up to 140m at 10°
  • Wide range of built-in 12W VAIR Illuminator up to 50m at 40°
  • Long-range 20W@600m PoE solution over single coax
  • Plug-and-play over a single coaxial cable
  • IP68 weather rating standards
  • IK10 impact rated on stainless steel outer shell
  • Window heater & blower included
  • Supports wide-angle & long-distance remote focus lens
  • Adjustable AISI 316L sunshield

Aplicación

Accessories

Bracket

Wall Mount Bracket
BK-103 AISI 316L Stainless steel
Wall Mount Bracket

Adapter

Pole Mount Adapter
AT-102 AISI 316L Stainless steel
Pole Mount Adapter

EPoT RX Switch

EPoT RX Switch
XT10-041-250 Four EPoT RJ45 ports & one Gigabit LAN port
6KV Surge Protection for EPoT port
250W Power Supply, 100~240VAC input

EPoT RX Adapter Series

EPoT RX Adapter Series
TE10-110-RX XE10-110 EPoT adapter(RX)
65W@56VDC power adapter TE11-110-RX XE11-110 PoE EPoT adapter(RX)
Supports 30W/60W/95W PoE Input

Features Matrix Table

Model Name
S5000-T
S5000-TI
S5100-T
EPoT In
V
V
V
MAX Distance
600m(1968ft)
500m(1640ft)
600m(1968ft)
Output
Power Budget
20W
25W
20W
Germanium window
V
Window
Heater
V
V
Adjustable
Sunshield
V
V
V
Blower
V
V
V
Built-in
12W VAIR
V
6KV Surge
Protection
V
V
V
IK10
V
V
V
IP66
V
IP68
V
V

Especificación

Interface / Distance
EPoT Connect
RJ45 x 1
Output PoE 10/100 Mbps Ethernet RJ45
20W@600m
Transmission mode
TX mode
Cable Type
Cat.5/Cat.6 Cable
Bandwidth
600 Mbps
Power Specifications
Power Input
EPoT@50~57VDC
Power Output
PoE, DC12V
Unit Power Consumption
Blower: 2W
Window Heater: 5W
IR LED: 12W
VAIR Illuminator
850nm,50~140m
BNC Surge Protection
6KV
Max. Power Budget
32W@300m
Certifications
EMC
CE, FCC, C-Tick
Physical Specifications
Window
Glass w/ heater
Body Material
AISI 316L stainless steel
Body Weight
8 kg
Cable Grants
PG16 x 2
Environmental Specifications
Dimensions (L x W x H)
460 x 172 x 242.5 mm
Operating Temperature
-20°C ~ 65°C (-4°F ~ 149°F)
Heater ON / OFF
≤20°C (68°F) ON
≥30°C (86°F) OFF
Blower ON / OFF
≤35°C (95°F) ON
≥25°C (77°F) OFF
Weather Rating
IP68
Vandal Proof
IK10
Impact Rated on AISI 316L
Stainless Steel Housing
LEDs
PWR
System power status
PoE
PoE status
LAN
Ethernet status
LINK
EPoT connect status