Products > PoE Switch > C51-244-30-370

C51-244-30-370

L2 Smart PoE Switch

Overview

The C51 series from AETEK offers a broad range of L2 Smart PoE Switches, equipped with multi-port Gigabit PoE (10M/100M/1G) and SFP transceiver (1G) slots for flexible link. The C51 series has three sub-models including 8 ports, 16 ports, and 24 ports complying with IEEE 802.3af/at standards with sufficient PoE power budget for any application.

Key Features

  • Layer 2 Switch
  • 802.1d (STP), 802.1w (RSTP), 802.1s (MSTP)
  • Loop protection
  • LACP
  • QoS
  • VLAN
  • Ethernet cable length measurement
  • DHCP Server
  • Flexible SFP transceiver ports for uplink
  • 15.4W/30W per port IEEE802.3af/at compliant
  • Supports 10/100/1000Mbps data rates
  • Support Auto-MDI/MDIX
  • Built-in 6KV surge protection for each PoE port
  • IEEE 802.3az Energy Efficient Ethernet standard for green power
  • 19" Rackmount installation

Applications

Accessories

SFP Module

SFP Module
SFP-SX-X5 Gigabit SFP Transceiver
• MMF
• 0.5 km
• 0°C ~70°C
SFP-SX-02 Gigabit SFP Transceiver
• MMF
• 2 km
• 0°C ~70°C

SFP Module
SFP-LX-10 Gigabit SFP Transceiver
• SMF
• 10 km
• 0°C ~70°C
SFP-LX-40 Gigabit SFP Transceiver
• SMF
• 40 km
• 0°C ~70°C

Specification Comparison

Model Name
C51-082-30-130
C51-164-30-250
C51-244-30-370
Total Gigabit Port
10
20
28
Gigabit PoE Port
(10M/100M/1G)
8
16
24
SFP slot
(1G)
2
2
2
Gigabit RJ45 slot
(10M/100M/1G)
-
2
2
Max. PoE Output Power/Per Port
30W
30W
30W
Power Budget
130W
250W
370W
Surge Protection
6KV
6KV
6KV

Specifications

PoE Management
Port Configuration
Supports per port PoE configuration function
PoE Scheduling
Supports per port PoE scheduling to turn on/off the PoE devices (PDs).
Auto-checking
Check the link status of PDs. Reboot PDs if there is no responses
Power Delay
The switch provides power to the PDs based on delay time when PoE switch boots up, in order to protect switch from misuse of the PDs.
Layer 2 Switching Specifications
Spanning Tree Protocol
MAC Bridges Standard Spanning Tree (STP) 802.1d, Rapid Spanning Tree (RSTP) 802.1w, Multiple Spanning Tree (MSTP) 802.1s
IP/Mac Port Trunking
Link Aggregation Control Protocol (LACP) IEEE 802.3ad , Static aggregation.
VLAN
Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs), Port-based VLAN, 802.1Q tag-based VLAN
IGMP v1/v2 Snooping
IGMP limits bandwidth-intensive multicast traffic to only the requesters.
Layer 3 Switching Specifications
DHCP Server
Assign IP to DHCP clients
Security
Port Security
Locks MAC addresses to ports, and limits the number of learned MAC address
Storm Control
Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port
Loop Protection
To prevent unknown unicast, broadcast and multicast loops in Layer 2 switching configurations.
QoS
Classification
Port based, 802.1p VLAN priority based
Bandwidth Control
Ingress policer, Egress shaping and rate control, Per port
Management software
Port Mirroring
Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported.
IEEE 802.1ab (LLDP)
Used by network devices for advertising their identities, capabilities, and neighbors on an IEEE 802ab local area network, Support LLDP-MED extensions
Web GUI Interface
Built-in switch configuration utility for browser-based device configuration
SNMP
SNMP version1, 2c
Flow Control The
The IEEE 802.3x standard for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats
Firmware Upgrade
Web browser upgrade (HTTP/ HTTPs) and TFTP
NTP
Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched
Other Management
System, HTTP, SSH, Telent, DHCP Client, Cable Diagnostics, Syslog, IPV4 Management
Networking Specifications
Total Gigabit Port
28
Gigabit PoE Port(10M/100M/1G)
24 x 30W PoE
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 803.3ab 1000BaseTX
Gigabit SFP Port
2
Gigabit RJ45 Port
2
Auto MDI / MDIX
Support
1Gbps Full Duplex_100Mbps Full / Half Duplex_10Mbps Full / Half Duplex
Support
Forwarding Capacity
38.688Mpps
Mac Table
8 k
Jumbo Frames
9,216 Bytes
Switching Capacity
56 Gbps
Power Specifications
Input Voltage
100VAC ~ 240VAC
Output Voltage Range /per PoE Port
54 VDC
PoE IEEE 802.3af (Max. 15.4W) output
PoE+ IEEE802.3at (Max. 30W) output
PSE Power Pin Assignment
12(-),36(+)
Switch power conusmption (without PoE)
10W
PoE Power Budget
370W
Surge Protection /each PoE Port
12KV
Mechanical Specifications
Dimensions (L x W x H)
440 x 200 x 44 mm
Weight
3.2KG
Environmental Specifications
Environmental Specifications
0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature
-20°C ~ 70°C (-4°F ~ 158°F)
Operating Humidity
10% to 90% non-condensing
Certifications
EMC
CE,FCC,VCCI,C-Tick Class A
Safety
EN62368-1, IEC62368-1
Surge
IEC-61000-4-5