Productos > EPoX Series > XE10-110-TX-V2

XE10-110-TX-V2

1-Port EPoC TX Adapter with 802.3af/at/bt PoE++ Output

La descripción general

The XE10-110-TX-V2, a 1-to-1 EPoC (Ethernet & Power over Coax) transmitter(TX) equipped with 1 BNC port & 1 RJ-45 PoE port, is designed to connect a remote PoE IP camera over single coax without requiring extra power supply.

This cutting-edge model delivers data and power at long range up to 1,200m for a PoE IP camera. Besides long-range PoE solution, XE10-110-TX-V2 is often used to upgrade legacy of CCTV to PoE IP surveillance without changing existing coaxial cable infrastructure.

+ AñadirALaListaDeConsultas DocumentoDeDescargar

Características principales

  • One BNC coax port & one PoE LAN port
  • Re-uses existing coax for a PoE IP camera
  • Delivers up to 8.3 watts@1,200m(3,937ft) for a PoE IP camera
  • PoE Output On/Off control
  • Support IEEE 802.3 bt/at/af PoE Output

Aplicación

Accessories

EPoC RX Switch

EPoC RX Switch
XC10-041-250 Four BNC coax ports & one LAN port

EPoC RX Adapter

EPoC RX Adapter
XE11-110-RX-V2 Supports 30W/60W/95W PoE Input

90W bt PoE Switch

90W bt PoE Switch
C42-042-91-380 • 4-port Gigabit 90W bt PoE
+ 2-port Gigabit RJ45
• 380W Power Budget C42-084-91-770 • 8-port Gigabit 90W bt PoE
+ 2-port Gigabit RJ45
+ 2-port Gigabit SFP
• 770W Power Budget

BNC Adapters

BNC Adapters
BNC-T T -Type BNC Adapter BNC-Y Y Type BNC Adapter

Accessories

Accessories
PA-150-065 100 ~ 240 VAC input 56VDC/65W output

Specifications comparison

Model
XE10-110-TX-V2
75Ω Coaxial BNC
1
10/100Mpps Ethernet RJ45
1
Transmission mode
TX mode
MAX.(Power+Data) Distance
8.3W@1200m(3937 ft)
PoE Pass Through
v

Especificación

Interface / Distance
Coaxial BNC
75 ohm x1
10/100 Mbps Ethernet
PoE PSE RJ45 x1
Transmission mode
Transmitter TX mode
MAX.(Power+Data) Distance
100Mbps, 9.7W@1,200m(3,937ft)
100Mbps@2,400m(7,874ft) Data only
Cable reference: RG6 Coax
Cable Type
75 ohm RG59/RG6/RG11 Coax
Data Rate
Coaxial cable : up to 100 Mbps asymmetrical to full range
Ethernet cable : 100 Base-TX Full Duplex
Power
Power Input
PoE over Coax
DC power jack: 56VDC
Power Output
IEEE 802.3bt PoE++ PSE
IEEE 802.3at PoE+ PSE
IEEE 802.3af PoE PSE
Unit Power Consumption
2W
EPoC Surge Protection
Optional extra surge protector : SD-301
Mechanical
Dimensions (W x D x H)
86.6 x 47.1 x 27.0 mm (3.41x1.85x1.06")
Weight
0.2 kg (0.44 lb)
Connectors
BNC x1, RJ45 x1, DC Jack x1, PoE On/Off Switch x1
Mounting Type
Wall mount, Din-rail (optional)
Casing
Metal
DIP Switch
PoE On/Off switch
Join Button
1~3 sec.: Link RX and TX
5~8 sec.: Disconnect RX and TX
10~15 sec.: Reset to default
Environmental
Operating Temperature
-20°C ~ 60°C (-4°F ~ 140°F)
Storage Temperature
-20°C ~ 85°C (-4°F ~ 185°F)
Operating Humidity
5% ~ 95% non-condensing
Certifications
EMC
CE, FCC, VCCI, C-Tick
Safety
EN62368-1
LEDs
POE
PoE status
LAN
Ethernet status
PWR
Power status
LINK
EPoC RX and TX connection status
DATA
Data transmission status over coax